Keeppower 1S1P 18650 2600mAh Li-ion Battery Pack with BMS Protection 18650 26J Cable and Connector

Description

Keeppower 1S1P 18650 2600mAh Li-ion Battery Pack with BMS Protection 18650 26J Cable and ConnectorRound Cell Keepower 1S1P 18650 Li-Ion Battery with PCB/BMS Protected with Wire Connector

High-quality cell with a long service life and high cycle stability. Li-ion cell from Samsung (Made in Korea) Samsung 18650 26J. Protection circuit BMS by Seiko (Made in Japan) XZD-1S5530. Seiko Protection/PCB with short circuit, overcharge and deep discharge protection. Removing the plug does not void the 2-year functional guarantee.

Features:

✓ No memory effect
✓ High energy density
✓ Short circuit protection
✓ Overcharge protection
✓ Deep discharge protection


Safety note:

Please note that removing or damaging the protective electronics (PCB)
can lead to a short circuit, fire or explosion

Technical specifications Capacity: 2600mAh Minimum capacity: 2550mAh Nominal voltage: 3.6V-3.7V End of charge voltage: 4.2V±0.05V end-of-discharge voltage: 2.50V Connections: cable with plug Discharge current (constant): 2C = 5.2A Chemistry: LiCoO2 (ICR) Protection Circuit PCB: integrated 5A Charging method: CC CV Diameter: 18.45mm ± 0.25mm Height: 69.00mm ± 0.25mm Weight: 50g ± 1g

A notice:

A special charger is required to charge lithium-ion batteries, which charges the batteries using a special charging process. (CCCV = constant current, constant voltage.) The batteries must not be charged above a voltage of 4.2 volts, otherwise there is a risk of fire and explosion. It is advantageous to only charge the batteries up to approx. 4.1 volts, as this significantly increases the service life and number of charging cycles (possibly up to a doubling). Only lithium ion chargers may be used for charging. However, the cheap chargers sometimes have the disadvantage that they do not switch off safely after the end of the charging process, but continue to charge the batteries with a small charging current, which can be dangerous.