RCR123A 3V 880mAh 1.5A lithium ion battery 16340, only rechargeable via micro USB

Description

RCR123A 3V 880mAh 1.5A lithium ion battery 16340, only rechargeable via micro USB

Provided that 2mm excess length can be compensated for, the RCR123A rechargeable Li-ion 3V battery is a full replacement for the non-rechargeable 3V photo battery of the CR123A design. A built-in Li-ion battery with 3.6V to 3.7V nominal voltage is regulated down to 3V with the help of electronics in the form of a PCB. The widely used type CR123A based on Li-ion revolutionizes the mobile energy supply for many applications.

3V RCR123A battery based on Li-Ion technology with 2580mWh and 880mAh.

The Keeppower RCR123A battery can replace the following non-rechargeable 3V batteries: CR123 A, CR123 R, R-CR123, CR17335, CR17345, DL123A, EL123AP, K123LA, L123A.

Height and diameter are larger than a standard CR123A battery without a PCB and USB charging option.

The stable and high output voltage makes the 3-volt lithium-ion batteries compatible with all devices that are optimized for operation with disposable batteries. Due to the high voltage, many devices have a high output, e.g. many flashlights or fairy lights are brighter or motors (toys, kitchen appliances) run faster than with non-rechargeable batteries.

Considering its length, the Keeppower RCR123A can replace the CR123A 3V battery.

Please note the dimensions of the cell before buying! Due to the built-in electronics, the cell is not suitable for every application!
Height and diameter are larger than a standard CR123A battery without a PCB and USB charging option.

Ideally suited for: wildlife cameras, fairy lights, model making, radios, photo equipment, flash units and much more. (Please note max. Current output of 1.5A and excess length)

Disadvantages: The electronic control only allows the discharge current of 1.5A specified in the key figures. The batteries can only be charged via USB or a suitable charger.

Important: Charging the Keeppower 3V Li-Ion. Batteries can only be used via the integrated micro USB socket. Charging with a conventional charger for NiMH / NiCD or Li-Ion batteries is not possible / permitted.

Chargers for Li-Ion 3V batteries from other manufacturers are not compatible.

Charging takes place through an integrated USB socket at any 5V USB port. Colored LEDs attached to the front of the batteries inform the user of the charging status. Charge your batteries on the go to any USB 5V connection (smartphone power pack, power bank, laptop, etc.), so they remain flexible and always have a charging option at hand.

Model: P1634U1 Capacity in mWh 2580mWh Capacity in mAh 860mAh Min. Capacity in mAh 860mAh / 0.2CmA nominal voltage 3V (volts) Charging voltage 5V USB Standard charging current 0.5A (500mA) Standard discharge current 0.300A (425mA) max. discharge current 1.5A (1500mA) Charging current 0.xx - 0.5A via USB Positive pole increased (button top) Achievable number of cycles approx. 1000 cycles diameter 16.60 mm ± 0.2 mm height 36.00mm ± 0.3mm weight 20 g ± 1 g Safety instructions:

Please note that lithium cells should only be used by competent persons.
Incorrect handling or a short circuit can lead to fire or explosion.

Other features:

Lithium-ion batteries are thermally stable and are not subject to any memory effect.
They work on the basis of lithium and are characterized by a high energy density.

Charging current normal 0.5A (500mA) entry 5V USB Operating temperature loading 0 ° C - 45 ° C Operating temperature discharging -20 ° C - 60 ° C Recommended storage temperature + 25 ± 5 ℃