Varta 6127 CR1/2AA lithium battery suitable for Theben sensor 883031, Theben time switch 612 S, TR66

Description

Varta 6127 CR1/2AA lithium battery suitable for Theben sensor 883031, Theben time switch 612 S, TR664 T2, plus contact 2-piece print, minus contact 1-piece print, verticalVarta 6127 CR1/2AA lithium battery suitable for Theben sensor 883031, Theben time switch 612 S, TR664 T2, plus contact 2-piece print, minus contact 1-piece print, vertical

short and compact, our article introduces itself

✓ with print connection ++-, plus contact 2-piece print and minus contact 1-piece print
✓ Varta 6127 CR1/2 AA lithium battery, standing
✓ Ideal as a replacement for Theben Sensor 883031, Theben Timer 612 S
✓ Height 25.1mm, diameter 14.75mm

Varta CR1/2AA lithium battery with 3-piece solder tag as a suitable replacement for Theben sensor 883031 and Theben time switch 612S. Replace the old battery with our freshly manufactured Varta lithium battery with print connection. The dimensions are 25.1mm x 14.75mm and the pitch is 10mm. Before ordering, please pay attention to the print connections and compare them with your existing battery, as there can also be different versions here!

Varta Lithium 3V disposable battery. The scope of delivery includes a Varta lithium battery with a 3-piece solder tag, standing.

Varta CR1/2 AA lithium battery with print connection ++, disposable battery for Theben time switch

High-performance batteries such as the Varta 6127 are typically used where the limited space in the housing does not allow quick replacement of primary cells or where special contact housings for batteries cannot be accommodated. This is the case, for example, in model building (ships, airplanes, remote controls), but it works with all small electronic devices that are designed for a long service life and constant electrical load. While the battery voltage is a little below the standard 3.5V that is often used for this form factor, it achieves a much higher energy density and longer lifespan. The Varta 6127 can be soldered directly into various housings thanks to the pre-assembled print soldering lugs.

Technical specifications cell size: 1/2 A.A System: Lithium Manganese Dioxide (LiMnO2) Tension: 3 v Capacity: 950mAh Pitch: 10mm Weight: 11.5 grams Dimensions: 25.1mm x 14.75mm