Varta CR1 / 2AA lithium battery 6127 with 3 print solder tail, plus contact 2, minus 1

Description

Varta CR1 / 2AA lithium battery 6127 with 3 print solder tail, plus contact 2, minus 1

Varta CR1 / 2AA lithium battery 6117, UL MH 13654 (N) with 3-piece solder tag Varta lithium manganese dioxide battery type number 6117 CR AA

Varta Lithium 3V battery CR 1 / 2AA-SLF Print 2/1 ++ / - VKB 6127 201 301

• Varta CR 1/2 AA lithium disposable battery
• with 3-way print contacts, plus contact 2-way, minus 1-way
  
• Lithium Manganese Dioxide battery
• Type Number 6127
• Varta UL MH 13654 (N)

Technical data Varta 6127201301:

System: Li-Mn Lithium Manganese Dioxide battery, size: CR1 / 2AA, voltage: 3.0 volts, capacity: 950mAh, dimensions (LxWxH): 24.9x14.45mm, weight: 11.5 grams

Further information:

The Varta 6127 is a CR1 / 2 high-performance battery with the form factor AA. Instead of the usual contacts in retail, the battery has two soldering lugs attached in opposite poles. The voltage of the Li-Mn battery (Lithium Mangan Dioxide) is 3.0 V, the power capacity is 950 mAh. Overall, the service life is 1680 operating hours based on a constant circuit load of 5600 ?. The dimensions are 14.45 millimeters in diameter with a length of 24.9 millimeters. The weight is 11.5 grams including the solder tags already attached.

High-performance batteries such as the Varta 6127 are typically used where the limited space in the housing does not allow rapid replacement of primary cells or where special contact housings for batteries cannot be accommodated. This is the case, for example, in model making (ships, airplanes, remote controls), but works with all small electronic devices that are designed for a long service life and constant electrical load. Although the voltage of the battery is a little below the standard 3.5 V that is often used for this form factor, it achieves a much higher energy density and a longer service life. The Varta 6127 can be soldered directly into various housings thanks to the pre-assembled 1-piece soldering tags. The production of so-called battery packs in series or parallel connection is also possible.