Varta CR1 / 2AA lithium battery 6127 with single print solder tab

Description

Varta CR1 / 2AA lithium battery 6117, UL MH 13654 (N) with 1 print solder tag Varta lithium manganese dioxide battery type number 6117 CR AA

• Varta CR 1/2 AA lithium disposable battery
• with 1 print soldering tag
• Lithium Manganese Dioxide battery
• Type Number 6127
• Varta UL MH 13654 (N)

Technical specifications:

System: Li-Mn Lithium Manganese Dioxide battery
Size: CR1 / 2AA
Voltage: 3.0 volts
Capacity: 950mAh
Dimensions (LxWxH): 24.9x14.45mm
Weight: 11.5 grams

Further information:

The Varta 6127 is a CR1 / 2 high-performance battery with the form factor AA. Instead of the usual contacts in retail, the battery has two soldering lugs attached in opposite poles. The voltage of the Li-Mn battery (Lithium Mangan Dioxide) is 3.0 V, the power capacity is 950 mAh. Overall, the service life is 1680 operating hours based on a constant circuit load of 5600 ?. The dimensions are 14.45 millimeters in diameter with a length of 24.9 millimeters. The weight is 11.5 grams including the solder tags already attached.

High-performance batteries such as the Varta 6127 are typically used where the limited space in the housing does not allow rapid replacement of primary cells or where special contact housings for batteries cannot be accommodated. This is the case, for example, in model making (ships, airplanes, remote controls), but works with all small electronic devices that are designed for a long service life and constant electrical load. Although the voltage of the battery is a little below the standard 3.5 V that is often used for this form factor, it achieves a much higher energy density and a longer service life. The Varta 6127 can be soldered directly into various housings thanks to the pre-assembled 1-piece soldering tags. The production of so-called battery packs in series or parallel connection is also possible.